Is 3D Printing Difficult and Expensive ?

3D Printing! is it Easy or Hard ?

I am about to enter the world of 3D printing because i see the potential in it for my upcoming projects. I have no experience with 3D printing, and I want to see how difficult is it to start with 3D Printing, and does it have to be expensive ?

So I found a cheap 3D printer on Ali-express where you have to assemble it yourself. So i’m exited to see how difficult that is.

The printer i bought was a Tevo Tarantula 

Tevo Tarantula 3D Printer

Tevo Tarantula 3D Printer

http://s.click.aliexpress.com/e/i2RBeYr

The price range is from 198$ to 390$ depending the options you choose. I ordered the default with bed auto-level and the 200x200x200 mm work area.

there are more cheap models from available, but i chose this one because of the aluminum frame, where many others have a acrylic frame. I think this will be easier to modify later in the process.

Received the printer today. So here are some pictures of what the Package contains.

Tevo Tarantula 3D Printing

I won’t get to much in detail about what the kit include until we go to assembly.

Tevo Tarantula 3D Printing

You get 2 rolls of filament one PLA and one ABS

Tevo Tarantula 3D Printing

The packaging is pretty good for such a cheap kit. Luckily because it looks like the postman have been playing football with the package.

Tevo Tarantula 3D Printing

I’m really looking forward to the assembly on this little machine. I will probably make a video of the assembly. Or maybe a timelapse. I haven’t decided yet, but i will try to document what problems i run into.

I will make updates on my sites and on YouTube as i move further in my 3D printing experience. I hope you will check back later to see how its going.

If you have any experience with cheap 3D printing please leave a comment below.

Related posts

DIY Gimbal Project (AlexMos) Worklog

DIY Gimbal Project (AlexMos) Worklog


DIY Gimbal Project (AlexMos) Worklog

Today i ordered the first parts for my Gimbal project.I have ordered Battery, Motors, and Controller, when i receive the parts i can begin to design the frame. The Gimbal is going the be used with a Sony A6000 Camera.This is the fist gimbal i ever made so this is Not a how to guide(at...

Battery Pack From Old Laptop

Battery Pack From Old Laptop


Battery Pack From Old Laptop

Make a 3S battery from old Laptop Battery I needed a battery for my gimbal, and wanted to make it as small as possible and still have enough power to run the gimbal properly. The top bar of the gimbal is an old carbon bike handlebar. And I thought it would be cool to have the battery inside...

Reef Build – W00tifrutti

Reef Build - W00tifrutti


Reef Build - W00tifrutti

Reefbuild This reefbuild is not mine, i just helped a friend build this Saltwater aquarium.The Tank is ordered with measurement to fit the furniture. 

Homemade Camera Gimbal Finished

Homemade Camera Gimbal Finished


Homemade Camera Gimbal Finished

Homemade Camera Gimbal Finished (Almost) So my Gimbal project is reached a state where i can call it almost finished. Of course such a project will always have place for improvements, But for now it is in a working order.A lot of people have been asking me for the drawings / plans for the...

Camera Slider – Controlled by Arduino

Camera Slider - Controlled by Arduino


Camera Slider - Controlled by Arduino

Camera Slider Build. This article is about how i made my own smart camera slider, i wanted to build my own camera slider that would be used for both video and timelapse photography. I spend a lot of time looking for parts for the build, and found the most of the parts i used in China, and i...

Camera Slider Schematics

Camera Slider Schematics


Camera Slider Schematics

Wiring diagram for My camera Slider build.The stepper motors wiring is dependent on witch stepper motor you use, so for that you have to examine how the wire it to the EasyDriver. Also the relay is wired but how you wire it to your camera is also something you have to examine to your...

Leave a Reply