Making a Concrete Table.

Homemade Concrete table.

I was looking for a new coffee table for my living room, because the old one was well used, but i could find one i like, or could afford.

So what to do ?  Well i decided to build my own and it went quite well i think 🙂

  • DSC06070.jpg?fit=3257%2C2455&ssl=1
  • DSC06073.jpg?fit=3876%2C2063&ssl=1
  • DSC06076.jpg?fit=3332%2C2400&ssl=1

I wanted something with a rustic look, so went for casting my own concrete tabletop, with an iron frame and aged wood at the bottom, and some wheels so it could be moved around easily.
Finished table.

After a lot of research on how to make the Table, i started to build a simple table that could vibrate the concrete to minimize the air bobbles in the surface of the table, by using and old motor, a tire, and a wooden sheet.
see the above video how i did it.

I then started to build the mold for the table top, unfortunately the camera was out of juice when i was making it, so it is not in the video.
As you can see in the video the simple vibrating table worked quite well, and the surface had no air bobbles in it.

My dad welded the frame for me, i gave it a matte clear coat, and drilled the holes for mounting the concrete top.
the bottom was made from some old scrap wood, and i gave the concrete top a coating of some Beeswax to make it stain resistance, and the wood also got some beeswax it gives it a more rustic look.

Please leave a comment on what you think or what i could have done differently.

Also take a look at my YouTube channel

 

logo

Related posts

Arduino code for the Camera Slider.

Arduino code for the Camera Slider.


Arduino code for the Camera Slider.

// Recently i have gotten some request for sharing the Arduino code for my homemade camera slider. To start with i just want to say, I'm no master in this, so there can be bugs, and the code is still early and not complete. Recently i haven't had much time for these kind of projects...

Camera Slider – Controlled by Arduino

Camera Slider - Controlled by Arduino


Camera Slider - Controlled by Arduino

Camera Slider Build. This article is about how i made my own smart camera slider, i wanted to build my own camera slider that would be used for both video and timelapse photography. I spend a lot of time looking for parts for the build, and found the most of the parts i used in China, and i...

Reef Build – W00tifrutti

Reef Build - W00tifrutti


Reef Build - W00tifrutti

Reefbuild This reefbuild is not mine, i just helped a friend build this Saltwater aquarium. The Tank is ordered with measurement to fit the furniture.  

Battery Pack From Old Laptop

Battery Pack From Old Laptop


Battery Pack From Old Laptop

Make a 3S battery from old Laptop Battery I needed a battery for my gimbal, and wanted to make it as small as possible and still have enough power to run the gimbal properly. The top bar of the gimbal is an old carbon bike handlebar. And I thought it would be cool to have the battery inside...

Is 3D Printing Difficult and Expensive ?

Is 3D Printing Difficult and Expensive ?


Is 3D Printing Difficult and Expensive ?

3D Printing! is it Easy or Hard ? I am about to enter the world of 3D printing because i see the potential in it for my upcoming projects. I have no experience with 3D printing, and I want to see how difficult is it to start with 3D Printing, and does it have to be expensive ? So I found a...

Mostly Printed CNC(MPCNC) Project

Mostly Printed CNC(MPCNC) Project


Mostly Printed CNC(MPCNC) Project

My newest project is building the mostly printed CNC machine. Created by vicious1 My goal with this is to share what I experienced with this build so other maybe benefit from it. I am certainly not an expert on CNC machines. and all of this has been a learning experience for me. I choose...

1 Comment

  1. Glenn August 3, 2017
    Reply

    What did you use for the motor

Leave a Reply